Lab scale spray dryer is our latest type which is the result of our constant innovation in this field of laboratory scale spray drying systems through longtime. It assembles many of new design, for example, small shape for free moving, combining air compressor and electrical heater inside the cabinet, glass spray and cyclone separator for inspecting. All the data and function are controlled by PLC, English language.
1. Color large touch screen operation, parameter LCD display
2. Real-time regulation of PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ° C
3. Filter systems can reduce air pollution and dust
4. The spray, drying and collecting device is made of transparent high-quality high-temperature resistant borosilicate glass. The whole spray drying experiment process is visible, which is convenient for controlling the experimental process and timely discovering and adjusting the problem.
5. The atomization structure of the two-fluid spray is made of high-precision stainless steel material. The diameter of the powder spray is normally distributed and the fluidity is good.
6. The jet is automatically unblocked (through the needle) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.
7. The amount of feed can be adjusted by the feed peristaltic pump, the minimum sample experiment volume 50ml
8. Shutdown protection function: When shutting down, when the heater is above 60°C, the fan cannot be turned off.
9. Built-in imported oil-free air compressor, noise less than 60db
Model | LSP-2000BS |
Water evaporation | 1000mL-2000 mL/h |
Minimum feed volume | 50ml |
Liquid delivery pump | 4-link rotor pump (feed tube: imported silicone peristaltic tube) (6-link rotor pump is optional) |
Fogging method | Refined two-fluid atomization nozzle (one air and one liquid) (optional refined plastic two-fluid atomization nozzle) |
Nozzle diameter | (Spraying System) optional 07/1.0/1.5/2.0/2.2mm, with the machine standard configuration 1.0mm (optional silicon carbide material, wear resistance is about 10 times the stainless steel) |
Average drying time | 1.0～1.5S |
Temperature setting range | 30-300℃ PID automatic control; (temperature can be set) |
Temperature adjustment accuracy | Inlet temperature ±1℃ |
Fans | Single-phase low-noise fan, fan flow; 3.2m³/min, wind pressure; 19KPa9 (Taiwan imported fan, silent and powerful) |
Temperature sensor | PT-100 Thermocouple |
Spray adjustment range | 0-0.8 MPa (0.2 MPa recommended) |
Spray pressure intake volume | 106L/min; exhaust volume; 36L/min; input power 580W |
Air compressor for spraying | Optional |
Electric heater power | 3.5KW |
Rated voltage | 220V/50HZ |
Inlet air treatment | Fiber cotton filter |
Liquid delivery pump flow range adjustment | 0-26ml/min |
Electrical box cooling | Brushless DC motor fan fan heat |
Air connection diameter for spraying | 6mm outer diameter air hose |
Function Protection | Fan does not start, heater does not start, air compressor does not start, peristaltic pump does not start |
Dimension | 1090(W)X600(D)X890(H)mm |
Equipment control mode | Touch Screen |
Whole machine material/weight | 304/105KG |
